IEEE Transactions on Power Electronics (ieee-transactions-on-power-electronics)

Journal positioning

IEEE Transactions on Power Electronics (TPEL) is the leading archival venue for power conversion: converter and inverter topologies, motor drives, control of power-electronic systems, magnetics and passive components, wide-bandgap devices in circuits, and power-electronics-enabled energy systems. The defining expectation is a concrete power-conversion advance backed by experimental validation — a topology, modulation, or control method whose benefit (efficiency, power density, reliability, dynamic response) is demonstrated on hardware, not only in simulation. Simulation-only proposals and minor topology permutations without measured benefit are a weak fit. This skill is a fit / venue-selection / re-framing tool. It does not replace the journal's current official author guidelines. Before submitting, re-check the live IEEE Transactions on Power Electronics author information and submission system.

When to trigger

• The author names TPEL for a converter, inverter, drive, or power-electronic-control manuscript and wants a fit/framing check.
• A design must be re-framed from "we built a converter" into a generalizable power-conversion contribution with measured, benchmarked benefit.
• The author is choosing between TPEL and ieee-transactions-on-industrial-electronics (broader industrial electronics) or an energy-systems venue.
• The author needs the hardware-validation bar and desk-reject heuristics specific to power electronics.

Scope & topic fit

• Converter and inverter topologies: DC-DC, DC-AC, AC-DC, multilevel, resonant, and soft-switching converters with a clear conversion advantage.
• Modulation and control of power-electronic systems: current/voltage control, model predictive control, stability of grid-tied and standalone converters.
• Motor drives and electric-machine control from the power-electronics side: drive topologies, modulation, and torque/efficiency performance.
• Wide-bandgap (SiC/GaN) device application in converters, gate drives, packaging, and thermal management with measured impact.
• Magnetics, passive components, EMI, and reliability of power-electronic converters; power-electronics interfaces for renewables, storage, and transportation.

Method & evidence bar

• The contribution is a power-conversion method with experimental validation — a hardware prototype with measured efficiency, power density, thermal, dynamic, or reliability results, typically expected at this venue.
• Simulation establishes design and operating principles but generally does not substitute for measurement; the absence of any hardware result is a common weakness.
• Efficiency and performance must be benchmarked against the relevant state-of-the-art topology/control under comparable conditions, with operating points and loss breakdowns reported.
• Claims (e.g., higher efficiency, lower EMI, better dynamics) must be supported by instrumented measurements with stated test conditions, component ratings, and control parameters.
• The contribution must generalize beyond one built unit: the design principle, trade-offs, and applicable operating range should be made explicit.

Structure & house style

• IEEE format; TPEL publishes full Papers and shorter Letters — match scope to the article type and re-check current definitions and limits on the live guide.
• The introduction motivates the conversion problem and positions against prior topologies/control; the analysis derives the operating principle before the experiment validates it.
• Figures are central and quantitative: schematics, modulation/control diagrams, measured waveforms, efficiency/loss curves, thermal images, and prototype photos.
• Hardware specifications (devices, magnetics, switching frequency, power level) must be reported in enough detail to reproduce the result.

Official-submission checklist

• Before giving submission-ready advice, read ../../resources/source-basis.md and ../../resources/official-source-map.md; start from the IEEE Author Center anchors, then cite the current Transactions on Power Electronics page you checked.
• Search the live site for "IEEE Transactions on Power Electronics information for authors" and follow the current submission-system version.
• Re-check article types (Paper vs. Letter), length/overlength policy, and the IEEE template.
• Confirm expectations for experimental validation, measured-data reporting, and any reproducibility requirements.
• Re-check ORCID, competing-interests, funding, author-contribution, and AI-use disclosure requirements, and IEEE open-access options.
• If the live official instructions conflict with this skill, the official instructions win.

Pre-submission self-check

• The contribution is a generalizable power-conversion advance, not a one-off build or a minor topology permutation.
• A hardware prototype provides measured efficiency/dynamic/thermal/reliability results, not simulation only.
• Performance is benchmarked against the relevant state-of-the-art topology/control under comparable conditions.
• Loss breakdowns, operating points, and test conditions are reported.
• Component ratings, switching frequency, and control parameters are detailed enough to reproduce.
• Article type (Paper vs. Letter) and length fit current limits.

Common desk-reject triggers

• Simulation-only converter/control proposal with no experimental validation.
• A minor topology permutation with no measured efficiency/performance benefit over existing designs.
• Efficiency claims with no loss breakdown, no benchmark, or under non-comparable test conditions.
• Results from a single built unit with no generalizable design principle or trade-off analysis.
• Application/integration paper where power electronics is incidental and no converter-level advance is shown.

Re-routing decision

• Broader industrial-electronics, drives, or industrial-systems emphasis → ieee-transactions-on-industrial-electronics.
• Grid/system-level integration rather than the converter → ieee-transactions-on-power-systems.
• Energy-system performance is the primary narrative → applied-energy.
• Battery/storage-cell or device materials focus → journal-of-power-sources / energy-storage-materials.
• Broad tutorial/survey of a power-electronics area → proceedings-of-the-ieee.

Output format

[Fit] High / Medium / Low (one-line reason)
[Target] IEEE Transactions on Power Electronics
[Topic tags] <2–3 closest power-electronics subtopics>
[Conversion advance] <the topology/control idea and the metric it improves>
[Hardware validation] <prototype + measured results present? benchmarked?>
[Top risk] <the single most likely reason for rejection>
[Article type] Paper / Letter
[Official items to re-check] <article type / length / experimental-validation / disclosures>
[Re-route suggestion] <if not a fit, a better-matched venue>